Planted Freshwater Led

1.Introduction

Our planted freshwater led especially designed for freshwater fish tank.It,s very Easy to Install Extra tool is unnecessary, following the steps in the photo, only 3 steps to install.Unique design of U-shaped slot,compatible with most aquarium light with extension bracket lamp.

What is it used for: It is use for hanging and adjusting the height of the aquarium lamp. We have make 5 point location on the bracket for your reference,to make sure the same height of the left and right side holder (Please make the two side on the same height to keep the balance of the aquarium light). The lowest height is 9CM (from the edge of the tank upwards), the maximum height is around 16CM (6.3inch). Confirm the height and fix it with screws.

Important function: Changing the height of riser to alter the intensity and range of light, to fit the various lighting needs of aquatic plants and fish, to aviod overheated water caused by the heat of lamp, to avoid water spattering on the lamp and affecting its life, and it is more convenient for cleaning the fish tank with planted freshwater led.

2.Description

DEFAULT MODE(24/7 Natural Mode): Gradient Orange light (sunrise) from 6 am to 8 am; Gradient White light from 8 am to 6 pm; Gradient Blue light (moonlight) from 6 pm to 10:50 pm; The lights are off in other time periods. PS: The 6-time points on the controller are used as a reference for the first running time setting. In other words, the overall default time period can be delayed or advanced

DIY MODE: Time + Color + Brightness can be set. Setting time(TIMER key): There are 3 choices, it can run for 6 hours, or 10 hours, or 12 hours; Brightness(up/down key): 5 kinds of brightness. Color(ON-OFF/ M key): White, Red, Blue, Green, Purple, Orange, Cyan, PS: The light slowly ramps up and down in 15 minutes, then comes the brightness you set. Cycle Color (No Brightness Selection)

NEW UPGRADE: The separable adapter, if it is damaged, no need to replace the whole light to avoid waste. The extendable bending bracket can be adjusted in length and easy to install, and can be applied to various freshwater tanks. Thicken aluminum to increase heat dissipation efficiency. Power-off memory function, whether it is 24/7 mode or Time mode, other settings remain unchanged, only the start time changes, the default operation starts at 6 am

USEFUL HELPERS: The light is soft, the color rendering index is close to natural light, up to 85%, protecting eyes and fish, to refuse the discomfort caused by stroboscopic for fish and viewers. Using high-quality 2835 + 5050 model lamp beads, long service life, at least 50,000 hours. Lamp beads waterproof, the light is easy to clean and wipe, No need to worry even if it falls into the water briefly.

3.Product feature and application

What is it used for: It is use for hanging and adjusting the height of the aquarium lamp. We have make 5 point location on the bracket for your reference,to make sure the same height of the left and right side holder (Please make the two side on the same height to keep the balance of the aquarium light). The lowest height is 9CM (from the edge of the tank upwards), the maximum height is around 16CM (6.3inch). Confirm the height and fix it with screws.

Important function: Changing the height of riser to alter the intensity and range of light, to fit the various lighting needs of aquatic plants and fish, to aviod overheated water caused by the heat of lamp, to avoid water spattering on the lamp and affecting its life, and it is more convenient for cleaning the fish tank.

Hot Tags: planted freshwater led, China planted freshwater led manufacturers, suppliers, factory, Aquarium Support Lamp, Rgb Planted Freshwater Led, Aquarium Bracket Light